Rubber Shore Durometer Scale Type A Hardness Tester astm d2240 Gauge Tester rubber hardness scale

Indenter: 0.79 Truncated Cone

Used for: test Soft Rubber, Elastomers, Natural Rubber Products, Neoprene, Resin, Polyester, Soft PVC, leather, etc.

Features:

* It meets standards of DIN 53505, ISO 868, ISO 7619, ASTMD 2240, JISK7215.
* With average calculate function.
* Peak value deposit function.
* Under-voltage alarm function.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.

Specifications:

Model	SD-301(A/B/C/D/E/O/DO/OO)
Parameters	Tested Result/Mean Value/Max.Value
Unit	HA/HB/HC/HD/HE/HDO/HO/HOO
Range	10~90HA(HB/HC/HD/HE/HDO/HO/HOO)
Accuracy	≤±1H
Resolution	0.1H
Battery Indicator	Low Battery Indicator
Auto Switch Off	√
Operating	Temperature:0~50ºC Humidity:<80%RH
Power Supply	4x1.5V AAA(UM-4)Battery
Power Supply	2x1.5V AAA(UM-4)Battery(Stand Available)
Dimensions	162x65x28 mm
Weight	170g
Standard	Main Unit
Accessories	Pin Length Teat Block
	Carrying Case(B04)
	Operation Manual
Optional	Shore Hardness Tester Measurement Stand
Accessories	Rubber Hardness Test Block(A/D Type)
	RS-232C Data Cable with Software
	Bluetooth Data Adapter with Software

Accessories:

Carrying case ................1 pc.

Operation manual .........1 pc.

Test block .....................1 pc.

NOTE: this test block is not the real hardness test sample. It is only an imitation. Just place the block onto a flat glass , then place the point of indenter into the hole of the block when take measurements