Applications：

Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep.

Feature:

* 2 same parameters in one display for 2 position measurement or 1 position measurement specified, showing 3 different parameters of velocity, acceleration and displacement in 1 display.

* In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
* Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.

* Individual high quality accelerometer for accurate and repeatable measurements.
* Wide frequency range (10Hz~10kHz) in acceleration mode.
* Optional headphones for use as electronic stethoscope.
* Bearing condition monitoring function.
* Use “USB data output” and “RS-232 data output” to connect with PC.

Sensor	Piezoelectric Transducer
Measuring Parameters & Range	Acceleration: 0.1-400.0 m/s Equivalent Peak; 0.3-1312 ft/s ; 0.0-40g
	Velocity: 0.01-400.0 mm/s True RMS; 0.004-16.00 inch/s
	Displacement: 0.001-4.000mm Equivalent Peak-Peak; 0.04-160.0 mil

Frequency Range	Acceleration: 10Hz ~ 10kHz
	Velocity: 10Hz ~1kHz
	Displacement: 10Hz ~ 1kHz
Accuracy	± ( 5%n + 0.2 )
Metric / Imperial Conversion
Analogue Output	AC Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k)
Max. Value Hold
Power Off	Manual Power Off or Auto Power Off
Battery Indicator	Low Battery Indicator
Data Output	USB, RS-232
Operating Conditions	Temperature: 0~50 °C Humidity: <90 %RH
Power Supply	4 x 1.5V AAA size (UM-4) Battery
Dimensions	140 x 73 x 35 mm
Weight	330 g

Standard Accessories:

1. Main Unit

2. Magnetic Suction Seat

3. Piezoelectric Transducer

4. Probe (Cone)

5. Probe (Spherical)

6. Carrying Case

7. Manual Book

Optional Accessories:

1. USB, RS-232 data cable with software

General
Batteries Inside	None
Calibration Standard	ISO2954
Function	Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery
HS Code	9031809090
Range	Acceleration: 0.1-400.0 m/s Equivalent Peak; 0.3-1312 ft/s ; 0.0-40g
Accuracy	± ( 5%n + 0.2 )
Size	140 x 73 x 35 mm
Type and Model
Material	ABS