Coating Thickness Meter Portable LCD Painting Thickness Gauge

Coating thickness measurement is very indispensable inspection for car painting, pipe coating. It is also referred to as painting thickness gauge. CM-8829(f/fe) is designed for two types. And one can choose the built-in probe and external probe type.

It is strongly recommended that no changes should be made to the value of Ln (controlled by power key, It takes about 11 seconds from starting depressing Power key. Its value can be changed by plus/minus key after displaying Lands releasing the power key. Store its value and quit by pressing Zero key.) which will seriously affect the accuracy. Its value can be adjusted by professional persons only under the cases of replacing a new probe or making the gauge more accurate. Generally, the larger the value of Ln, the smaller the reading on a same thickness. A little variation of value of Ln will cause a great change in reading at high end (e.g. at 500 um/20mil).

Features:

- Two measuring methods: magnetic induction (F) and eddy current (N)
- Two measurement mode: Single and Continuous(Notice Continuous mode is convenient to measure the
coating thickness of curved objects and tiny objects.）
- Metric/imperial system selectable.

- Manual or automatic shut down.

- Automatic memory of calibration value, and automatic recognize the substrate.
- Operation process have buzzing reminder, while no buzzing in continuous mode.
- Use /USB data output” and “RS-232 data output” to connect with PC.

- Provide Bluetooth ™ data output” choice.

- Separate Type can provide several type probe, measure can be more flexibility.

Who need the gauge:

The Gauge is often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminum tile, some alloy tile, paper etc. The N probes measure the thickness of non-conductive coatings on non-magnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.

Specification:

Operating principle: magnetic induction/eddy current (F/NF)

Measuring range:0-1250um/0-50mil

Resolution; 0.1/1

Accuracy: ±1-3%n or ±2.5um

Min. measuring area: 6mm

Min. sample thickness: 0.3mm

Battery indicator: low battery indicator

Metric/ imperial: convertible

Power supply: 4x1.5V AAA(UM-4)battery

Auto power off

Operating conditions:0-+45℃(32℉-104℉),≤90%RH

Dimensions: 126x65x27mm

weight: 81g(not including battery)

General
Batteries Inside	No battery
Characteristic	* Metric/imperial system selectable. * Manual or automatic shut down. * Automatic memory of calibration value, and automatic recognize the substrate
HS Code	9031809090
Type and Model
Part NO	CM-8829
Color	Black
Material	ABs