8kv Holiday Detector Spark Tester Porosimeter Jeeper

Specification:

1. Applicable detection thickness: 30μm~1.5mm

2. Output High-voltage: 0.6kv~8kv (stepless and continually adjustable)

3. Direct indication of output high-voltage

4. Battery:12V/2800mA

5. Power consumption: about 6W

6. Volume of main detector: 220×130×88 mm

7. Back light

8. Instantaneous boot, and automatic shutdown

9. 3-digit LCD displays output voltage, and with all-touch panel

10. Alarm: Dual alarm with earphone and buzzer

Packing List

(1) Holiday Detector 1set

(2) High-voltage probe 1 piece

(3) Probe brush 2 pieces

(4) Connecting rod 1 piece

(5) Earphone 1 piece

(6) Backstrap 1 piece

(7) Fuse 2 piece

(8) Manual　　　　　　　　　　　　 1 copy

(9) Warranty Card and Certificate of Conformity 1 copy　

(10) External packing box　　　　　　　　 1 piece

(11) Earthing wire　　　　　　　　　　　 1 piece

(12) Charger　　　　　　　　　　　　　 1 set

Note: Arc brush and circular probe are selectable (any length)

Attached Table for Detection Voltage

Anti-corrosion Material	Thickness of Anti-corrosion Coating (mm)	Detection Voltage (KV)	Remarks
Epoxy Coal Tar	0.2 0.4 0.6 0.8	4-5KV or self-defined	Perform according to standard (if provided)
Oil Asphalt	2 3 5.5 7 9	11 15 18 20 24	Perform according to standard (if provided)
Polyethylene Adhesive Tape	Based on: 3249TC=V conversion formula V: voltage; TC: thickness of anti-corrosion coating Perform according to SY4014-92 Acceptance Standard
Glass Lining	Determine detection voltage according to previous experience. Generally, it is 8KV～20KV.
Other Anti-corrosion Materials	Detect voltage according to the design of design department or material insulation