Power Quality Analyzer Class A Energy Analyzer Harmonic Tester
Ask sales reps for details.
Part No: PQAN7620
Features:
More accurate up to 0.1% on Vrms(voltage), Frequency: 0.01Hz
Meet standard: IEC61000-4-30 Class S
Phase: -180~180
Lart 5.6 inch TFT LCD 640*480 resolution
With USB and lan interface
Safety standard: IEC61010-1 ,Safety Degree: 600V CAT IV 1000V CAT III
Specification:
| Selection Table | |
| Model | PQAN7610 |
| Standard compliance | IEC61000-4-30 Class A |
| Volt Amp Hz | ● |
| Dips and swell | ● |
| Harmonics | ● 100th Max. |
| Power and energy | ● |
| Unbalance | ● |
| Monitor | ● |
| Inrush | ● |
| Flicker | ● |
| Transients | ● |
| 400Hz | ● |
| Wave Recording | ● |
| Sample rate | 163.84kS/s （50/60Hz） |
| TF Card | 32GB |
| Battery | Lithium ion, 7.4V 5200mAh |
| GPS/Beidou time synchronization | ● (option) |
| WIFI | ● |
| Input Characteristics | |
| Number of inputs | 4 (3 phase + neutral) DC coupling |
| Voltage Inputs | |
| Max. input voltage | 1000Vrms |
| Max. peak measurement voltage | 6kV |
| Input Impedance | 4MΩ |
| Current Input | |
| Type | Clamp or current transformer with mV output |
| Input Range | depends on supplied current clamp |
| Input Impedance | 50kΩ 100kΩ (SA2200) |
| Sampling System | |
| Resolution | 8 channels 16 bits AD |
| Sampling Rate | 163.84kS/s (50/60Hz), 8 channels sample
synchronously (SA2200) |
| Measurement | |||
| Measurement Range | Resolution | Accuracy | |
| Voltage/Current/Frequency | |||
| Vrms(AC+DC) | 1 ~ 1000Vrms | 0.01Vrms | ±0.1% of nominal
voltage |
| Vpk | 1 ~ 1400Vpk | 0.01Vpk | ±0.5% of nominal
voltage |
| V(Crest Factor) | 1.0 ~ >2.8 | 0.01 | ±5% |
| Arms（AC） 10mV/A 1mV/A 65mV/1000A (AC) |
|||
| 0~150A | 0.01A | ±0.1%±0.1A | |
| 1~2000A | 0.01A | ±0.1%±0.1A | |
| 10~6000A | 0.01A | ±1%±2A | |
| A(Crest Factor) | 1 ~ 10 | 0.01 | ±5% |
| Frequency | 42.5~57.5（50Hz nominal） | 0.01Hz | ±0.01Hz |
| 51~69（60Hz nominal） | 0.01Hz | ±0.01Hz | |
| 320~480（400Hz nominal） | 0.01Hz | ±0.01Hz | |
| Dips & Swells | |||
| Vrms1/2 | 0 ~ 200% of nominal voltage | 0.01Vrms | ±0.2% |
| Arms1/2 | depends on current clamps | 0.01A | ±1% |
| Harmonic (IEC61000-4-7) | |||
| Harmonic Number | 1 ~ 100(50/60Hz) (IEC61000-4-7) 1~12(400Hz) | ||
| Harmonic Voltage %f | 0.0 ~ 100.0% | 0.01% | ±0.1% ± nx0.1% |
| Harmonic Current %f | 0.0 ~ 100.0% | 0.01% | ±0.1% ± nx0.1% |
| THD | 0.0 ~ 100.0% | 0.01% | ±2.5% |
| Phase | -180° ~180 0° | 0.1° | ± nx0.1° |
| Power and Energy | |||
| P, S, Q1 | Max. 6000MW | 0.1kW | ±1%±10 digits |
| PF & cosФ | 0 ~ 1 | 0.01 | ±0.1% |
| kWh, kVAh, kvarh | depends on nominal voltage and current clamps | ±1%±10 digits | |
| Flicker (IEC61000-4-15) | |||
| Pst(10min)/Plt (2 hrs) | 0.00 ~ 20.00 | 0.01 | ±5% |
| Unbalance | |||
| Voltage | 0.0 ~ 20.0% | 0.1% | ±0.1% |
| Current | 0.0 ~ 20.0% | 0.1% | ±1% |
| Voltage Phase | -360° ~ 0° | 0.1° | ±0.1° |
| Current Phase | -360° ~ 0° | 0.1° | ±0.5° |
| Voltage Transient | |||
| Vpk | ±6000Vpk | 1V | ±15% |
| Vrms | 10 ~ 1000Vrms | 1V | ±2.5% |
| Min. Test Time | 6.5us | ||
| Inrush Current | |||
| Arms | depends on current clamps | 0.01 | ±1% ± 5digits |
| Inrush Duration | 1 ~ 32min selectable | 10ms | ±20ms |
| Logger | |||
| Recording | user-defined parameters for 4 phases at the same time | ||
| Memory | Data stored in TF card, 32GB | ||
| Duration Time | 2 hrs to 1 year, depends on the recording items and time interval | ||
| Interval | 1s to 60 minutes | ||
CT clamps: (Option)
A: Range: 5A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 45Hz~55Hz Clamps Radius: 8mm
Size: 158*43*24mm
B: Range: 50A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 50Hz~400Hz Clamps Radius: 8mm
Size: 171*46*27mm
C: Range: 100A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 50Hz~400Hz Clamps Radius: 13mm
Size: 174*52*27mm
D: Range: 1A~1000A, Output Voltage Ratio: 1mV/A Accuracy: 1%
Working Frequency: 40Hz~100Hz Clamps Radius: 52mm
Size: 111*216*45mm
E: Flex type Primary Current Rating: 3000A , Output Voltage Ratio: 65mV/1000A
Range: 15A~3000A Accuracy: 1%+position Error
Maximum Allowable imput: 100KA Phase Error: Less than 1%
Noise: less than 2mVrms(10Hz~10Khz) Frequency Characteristic: 10Hz~10KHz(-3db)
Weight: 130g Length: 200cm CT perimeter: 50cm Postion Error: 2%
F: Flex type Primary Current Rating: 5000A , Output Voltage Ratio: 50mV/1000A
Range: 20A~1000A Accuracy: 1%+position Error
Maximum Allowable imput: 100KA Phase Error: Less than 1%
Noise: less than 2mVrms(10Hz~10Khz) Frequency Characteristic: 10Hz~10KHz(-3db)
Weight: 130g Length: 200cm CT perimeter: 50cm Postion Error: 2%
| General | |
| Batteries Inside | Lithium ion, 7.4V 5200mAh |
| Characteristic | Dips and swell, Harmonic（IEC61000-4-30), Power and Energy |
Power Quality Analyzer Class A Energy Analyzer Harmonic Tester
- Product Code: PQAN-7620
- Availability: 2-3 Days
-
$3,328.00
Related Products
Multi-angle View USB 2.0 Type-C LCD Voltmeter USB Tester Voltage Current
Multi-angle View USB 2.0 Type-C LCD Voltmeter USB Tester This new updated version USB teste..
$16.50
Process Calibrator Frequency Current Voltage
Handheld Process Calibrator Frequency Current Voltage Precision current voltage frequency calibra..
$276.99
UT216A UT216B UT216C UT216D Digital Clamp Meter
UT216A UT216B UT216C UT216D Digital Clamp Meter UT216 series digital clamp meters are designed fo..
$66.99
Electrical Multimeter True RMS IP65 Waterproof Dustproof Anit Drop Digital Multimeter
Electrical Multimeters True RMS IP65 Waterproof Dustproof Anit Drop Digital Multimeter ..
$159.49
UT123D Digital Multimeter 4mF Capacitance NVC Diode Continuity
UT123D Digital Multimeter 4mF Capacitance NVC Diode Continuity Features: Measures AC/D..
$24.57
UT205A Auto Range 1000A Digital Clamp Meters Multimeter
UT205A Auto Range 1000A Digital Clamp Meters Multimeter Electronic Test Equipment UT205A is a pro..
$75.69
HDS2102 Handheld Oscilloscope 100MHz Bandwidth 20000 Counts Multiumeter
HDS2102 Choose A HDS2102S Choose B HDS2102 Handheld Oscillosc..
$220.00
UT123 DC AC Autol Range Digital Multimeter NCV Temperature Meter
UT123 DC AC Autol Range Digital Multimeter NCV Temperature Meter Description: Now that..
$16.98
Tags: Power Quality Analyzer, Energy Analyzer, Harmonic Power Analyzer
Featured
-200x200.jpg "DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide")
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide ISO17025 Not Including Th..
$28.99 $35.99
-200x200.jpg "Steel Wire Rope Hoisting Cable Diameter Digital Caliper Sponge Thickness Vernier Caliper")
Steel Wire Rope Hoisting Cable Diameter Digital Caliper Sponge Thickness Vernier Caliper
Steel Wire Rope Hoisting Cable Diameter Digital Caliper With Large Measuring Jaw Sponge Th..
$77.99
Universal Bridge Cam Welding Gage
Universal Bridge Cam Welding Gage WGU-8M WG-218 is updated from ROK WG-208, These two ..
$18.99
Dual Range NCV test 35/6 Bit Digital Multimeter
Dual Range NCV test 35/6 Bit Digital Multimeter Features: 1. AC DC measureme..
$48.90
Latest
1.0-13.0mm Twist Drill Bit Set Cobalt M35 For Drill Stainless Steel
1.0-13.0mm Twist Drill Bit Set Cobalt M35 For Drill Stainless Steel There is a little difference ..
$42.99
1.0-10mm Cobalt Twist Drill Bit Set M35
1.0-10mm Cobalt Twist Drill Bit Set M3 Box shape or color may differs from batches. ..
$19.99
13pcs Drill Bit Set Straight Shank M35
13pcs Drill Bit Set Straight Shank M35 Specification: 1.5mm, 2mm, 2.5mm, 3mm, ..
$9.90
Metric 99 Pieces Twist Drill Bit Set Straight Shank
Metric 99 Pieces Twist Drill Bit Set Straight Shank Material: 4241 Do not use for carbon steel..
$7.99
360 Green Beam Laser Level Self Levelling
360 Green Beam Laser Level Self Levelling Features: High quality LD Light source Re..
$106.99
50Pcs Twist Drill Bit Set HSS Coated 1-3mm Steel
50Pcs Twist Drill Bit Set HSS Coated 1-3mm Steel Specification: Material: Hi..
$8.99
50pcs Twist Drill Bit Set 1-3mm
50pcs Twist Drill Bit Set 1-3mm Color: silver -Size: 1 mm/0.04 inch. 15 mm/0.06 inch. ..
$5.99
Digital Impact Torque Meter
Digital Impact Torque Meter | Analyzers & Meters for Calibration ..
$933.00