Flexible Clamp Meter 3000A AC Current Voltage Tester Flex Clamp meter

Function	Three-phase AC voltage, leakage current, current, active power, reactive power, apparent power, total power, phase of current and voltage, phase between voltage, frequency, energy, phase sequence, etc.
Power	DC4.5V 7# Alkaline battery（1.5V AAA×3）(not included)
Measure mode	Flexible CT, three-phase voltage clip
Jaw size	φ150mm/φ300mm
Wire position	The measured wire is at the center of the flexible coil
Data storage	200groups，display "FULL" symbol indicates that storage is full
Frequency	50Hz/60Hz automatic identification
Shift	Automatic switching
Sample rate	About 2 times/second
Line voltage	AC 600V line measurement
Display mode	LCD：128dots×64dots；Display area：43mm×29mm
Instrument size	Host size:W/T/H 15110035mm (without coil)
Backlight	Have
Data storage	Data storage function：“HOLD”symbol display
Overflow display	Overrange overflow function:“OL”symbol display
Automatic shut-down	About 15 minutes after power on, the meter will automatically shut down to reduce battery consumption
Battery voltage	When the battery voltage drops to about 3.15V, the battery voltage is low and the symbol is displayed to remind you to replace the battery.
Instrument weight	Instrument：1kg(with battery and accessories)
Working current	Backlight turn on 50mA
Working temperature and humidity	-10℃～40℃；below 80%rh
Storage temperature and humidity	-10℃～60℃；below 70%rh
Insulation strength	AC 3700V/rms(Between core and shell)
Suitable for Safety Regulations	IEC1010-1,IEC1010-2-032,pollution level 2,CAT Ⅲ(600V)

General
Characteristic	Flexible CT, three-phase voltage clip
English Instruction	in the package
Function	Three-phase AC voltage, leakage current, current, active power, reactive power, apparent power, total power, phase of current and voltage
Port of Shipping	Shenzhen, Shanghai, beijing, shijiazhuang, Dalian
Shipping To	Brazil, Japan, Korea, Australia, USA, Inida
Working Temperature	5-45 cel degree
Weight	Net weight: 1KG