300mm Flexible AC Current Clamp Meter 0mA~10000A Clamp on Ammeter Eletrical Tester CAT III
Features:
- Flexible coil without any exposed metal conductors, small size, light weight, soft and flexible, especially suitable for large size conductor, narrow environment and cable dense place.
- No magnetic saturation, strong anti-interference ability. Especially suitable for the relay protection, silicon controlled rectifier, frequency conversion speed regulation, semiconductor switch, power electronic conversion equipment, arc welding and other industrial environment with serious signal distortion.
- Display multiple measurement parameters on same screen, easy to operate. Can be used as the normal multimeter.
- Withdata 600 groups Memory
- USB communication interface
Specification:
1.Measurement Range & Error
Measurement Parameter | Measurement Range | Max. Solution | Basic Error |
Current | AC 0mA~10000A | 1mA | ±2%rdg±5dgt |
DC Voltage | DC 0.0V~1000.0V | 0.1V | ±1.5%rdg±5dgt |
AC Voltage | AC 0.0V~750.0V | 0.1V | ±1.5%rdg±3dgt |
Resistance | 0.000kΩ~2.000kΩ | 1Ω | ±2%rdg±5dgt |
2.Basic Specifications
Power Supply | 6V DC(LR03×4 sections Alkaline dry battery) |
Display Mode | 2.8 inch TFT true-color LCD Screen; display area: 58mm×44mm |
Clamp Jaw Size | φ300mm |
Flexible Coil Diameter | Φ7.5mm |
Wire Position | The measured wire is in the center position of the clamp. |
Memory | 600 groups |
Communication Interface | Can realize uploading stored data to the computer for easy data analysis. |
Communication Line | Length 1.8m |
Frequency | 50Hz/60Hz Automatic identification |
Shift Gear | Fully automatic shift |
Sampling Rate | 2 times/second |
Backlight | Yes, Press “*” key to control |
Data Hold | Data hold function: “HOLD”symbol display |
Overflow Display | Exceed measure range overflow function: “OL”symbol display |
Automatic Shutdown | 10 Minutes after power on, the meter shut down automatically without any operation to reduce battery consumption |
Battery Voltage | While battery voltage decrease to about 4.8V,low battery voltage symbol display, and remind to replace the battery. |
Meter Size | 300mm×470mm×35mm |
Weight | Meter: about 272g, total weight: about 755g(include battery & accessory) |
Working Current | Backlight on: 80mA; Backlight off: 40mA |
Insulation Length | AC 3700V/rms(between the core and outside shell) |
Suitable Safety Standard | IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) |
Working Temperature & Humidity | -10℃~40℃; below 80%RH |
Storage Temperature & Humidity | -10℃~60℃; below 70%RH |
General | |
Range | AC 0mA~10000A |
300mm Flexible AC Current Clamp Multimeter 0mA~10000A Clamp on Ammeter
- Brand: ROKTOOLS
- Product Code: CLME-22063
- Availability: In Stock
-
$138.00
Related Products
Digital Clamp On Ground Earth Resistance Tester 0.01Ω-1200Ω
Digital Clamp On Ground Earth Resistance Tester 0.01Ω-1200Ω Specification: Function:..
$224.99
UT601 Inductance Capacitance Meter Diode Capacitor Tester
UT601 Inductance Capacitance Meter Diode Capacitor Tester UT600 series digit..
$64.55
MR9270S Signal Generator PT100 Analogs Voltage Current Calibrator
MR9270S Signal Generator PT100 Analogs Voltage Current Calibrator ntroduction to MR9270S + HART ..
$245.00
LRS-100-24 Enclosed Power Supply PSU 1 Output
LRS-100-24 Enclosed Power Supply PSU 1 Output Features Withstand 300 VAC surge input for 5 ..
$16.99
70mm Clamp Meter 1200A Leakage Current Tester Harmonics Analyzer
70mm Clamp Meter 1200A Leakage Current Tester Harmonics Analyzer It is..
$148.88
Digital Earth Resistance Meter Megohmmeter Ground Resistance Tester
Digital Earth Resistance Meter Megohmmeter Ground Resistance Tester DY4100 Digital Ground Resist..
$78.99
2000A Digital Clamp Meter 80mm CT Current AC/DC Voltage Ohm
2000A Digital Clamp Meter 80mm CT Current AC/DC Voltage Ohm Large Caliber Leakage Clamp Meter i..
$339.86
Portable Digital Oscilloscope 500M Sampling Rate 10MHz Analog Bandwidth
(Discontinue)Anti-Drop Portable Digital Oscilloscope 500M Sampling Rate 10MHz Analog BandwidthProduc..
$71.99
Tags: Flexible AC Current clamp multimeter, 0mA~10000A Clamp on Ammeter, Continuity Test
Featured
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide ISO17025 Not Including Th..
$28.99 $35.99
Steel Wire Rope Hoisting Cable Diameter Digital Caliper Sponge Thickness Vernier Caliper
Steel Wire Rope Hoisting Cable Diameter Digital Caliper With Large Measuring Jaw Sponge Th..
$77.99
Universal Bridge Cam Welding Gage
Universal Bridge Cam Welding Gage WGU-8M WG-218 is updated from ROK WG-208, These two ..
$18.99
Dual Range NCV test 35/6 Bit Digital Multimeter
Dual Range NCV test 35/6 Bit Digital Multimeter Features: 1. AC DC measureme..
$48.90
Latest
Digital Impact Torque Meter
Digital Impact Torque Meter | Analyzers & Meters for Calibration ..
$933.00
Digital Torque Meter with Printer
Digital Torque Meter with Printer Specification: Part No. Max N.m Ma..
$698.00
Digital Torque Meter Without Printer 1 N.m
Digital Torque Meter Without Printer 1-N.m Features 1.High precision, high resolution, quick sam..
$555.00
Digital Torque Meter Small Range Three Jaws
Digital Torque Meter Small Range Three Jaws Features: Torque Value Reading: Accu..
$510.00
Digital Torque Screwdriver With Display
Digital Torque Screwdriver With Display Features: With backlight Instantly switches..
$88.00
7pcs Welding Gauge Set
7pcs Welding Gauge Set Including: WG-504 0-15mm Taper welding gauge CL-110  ..
$83.00
Digital Torque Wrench Tester 20N.mTorque Wrench Calibrator
Digital Torque Wrench Tester 20N.m Torque Wrench Calibrator &nbs..
$1,800.00
5.00-10.00 Metric Pin Gauge Set Steel 0.01 increments
5.00-10.00 Metric Pin Gauge Set Steel 0.01 increments Features: ----P..
$122.99