Digital 3 Phase Voltammeter Current Tester Voltage Meter volt-Ampere Meter Voltage Amp Tester

three-phase digital phase volt-ampere meter has the ability to directly measure the AC voltage, AC current, the phase between voltage, between currents and the phase between voltage and current, it also has other measurement judgment functions, judge the inductive current and capacitive circuit,check the transformer wiring group,check whether the power meter is wired correctly. It is the ideal instrument for checking the use of power and performing secondary circuit inspection.

Specification:

Power	DC3.7V Ni-MH rechargeable battery
Power consumption	Max 50mA
Display mode	LCD display，72×55mm
Instrument size	W/H/T：18711948mm
Voltage range	AC 0.00V～600V	Resolution：0.01V	Accuracy：±0.5% FS
Current range	AC 0.0mA～20.0A	Resolution：0.1mA	Accuracy：±0.5% FS
Phase range	0.0°～360.0°	Resolution：0.1°	Accuracy：±1°
Frequency range	45.00Hz～65.00Hz	Resolution：0.01Hz	Accuracy：±0.5Hz
Active power range	0.0W～12kW	Resolution：0.1W	Accuracy：±(3%rdg+3dgt)
Reactive power range	0.0W～12kVAR	Resolution：0.1VAR	Accuracy：±(3%rdg+3dgt)
Apparent power range	0.0W～12kVA	Resolution：0.1VA	Accuracy：±(3%rdg+3dgt)
Power factor range	-1～+1	Resolution：0.001	Accuracy：±0.03
Current vector sum	0mA～60.0A
Phase sequence	Positive phase：U1、U2、U3 or I1、I2、I3 cursor blinks from left to right Reverse phase：U1、U2、U3 or I1、I2、I3 cursor blinks from right to left
Detection rate	About 2 second/time
Data hold	Press HOLD key to hold data during test, "HOLD" symbol display
Silicone protective cover	Have
Data storage	500 groups
USB interface	USB interface, uploading data to a computer for analysis of management data
Automatic shut-down	About 15 minutes after power on, the meter will automatically shut down to reduce battery consumption
Backlight function	Yes, suitable for dark places and night use
Voltage detection	When the battery voltage is lower than 5.2V, the battery voltage is low and the symbol indicates, prompting timely charging
Instrument weight	Host：380g(Ni-MH rechargeable battery pack)
	Tip-shaped current clamp：180g×3
	Test line：190g
Voltage test line length	1.5m
Current clamp line length	2m
Working temperature and humidity	-10℃～40℃；below 80%Rh
Storage temperature and humidity	-10℃～60℃；below 70%Rh
Input impedence	Test voltage input impedance is：1MΩ
Pressure resistance	The withstand voltage of 1000V/50Hz sine wave AC voltage between the instrument circuit and the housing lasts 1 minute
Insulation	Between instrument line and housing≥100MΩ
Structure	Housing insulation
Suitable for safety regulations	IEC61010-1 CAT Ⅲ 600V，IEC61010-031，IEC61326，pollution level 2

General
Batteries Inside	DC3.7V Ni-MH rechargeable battery
English Instruction	Yes
Safety	IEC61010-1 CAT Ⅲ 600V，IEC61010-031，IEC61326，pollution level 2
Shipping To	USA, Canada, Russia, France, Australia, Brazil, japan
Original	shajing
Packing List	Phase voltmeter 1PC; Current clamp 3PCS; USB communication line 1PC; Monitoring software (CD-ROM) 1PC; Instrument box 1PC; 3.7V lithium rechargeable battery(internal) 1PC; Charger 1PC; Test line 4PCS(yellow, green, red, black each 1); Manual, certificate 1SET
Type and Model
Color	grey
Material	ABS