Power Quality Analyzer Class A Energy Analyzer Harmonic Tester
Ask sales reps for details.
Part No: PQAN7620
Features:
More accurate up to 0.1% on Vrms(voltage), Frequency: 0.01Hz
Meet standard: IEC61000-4-30 Class S
Phase: -180~180
Lart 5.6 inch TFT LCD 640*480 resolution
With USB and lan interface
Safety standard: IEC61010-1 ,Safety Degree: 600V CAT IV 1000V CAT III
Specification:
| Selection Table | |
| Model | PQAN7610 |
| Standard compliance | IEC61000-4-30 Class A |
| Volt Amp Hz | ● |
| Dips and swell | ● |
| Harmonics | ● 100th Max. |
| Power and energy | ● |
| Unbalance | ● |
| Monitor | ● |
| Inrush | ● |
| Flicker | ● |
| Transients | ● |
| 400Hz | ● |
| Wave Recording | ● |
| Sample rate | 163.84kS/s （50/60Hz） |
| TF Card | 32GB |
| Battery | Lithium ion, 7.4V 5200mAh |
| GPS/Beidou time synchronization | ● (option) |
| WIFI | ● |
| Input Characteristics | |
| Number of inputs | 4 (3 phase + neutral) DC coupling |
| Voltage Inputs | |
| Max. input voltage | 1000Vrms |
| Max. peak measurement voltage | 6kV |
| Input Impedance | 4MΩ |
| Current Input | |
| Type | Clamp or current transformer with mV output |
| Input Range | depends on supplied current clamp |
| Input Impedance | 50kΩ 100kΩ (SA2200) |
| Sampling System | |
| Resolution | 8 channels 16 bits AD |
| Sampling Rate | 163.84kS/s (50/60Hz), 8 channels sample
synchronously (SA2200) |
| Measurement | |||
| Measurement Range | Resolution | Accuracy | |
| Voltage/Current/Frequency | |||
| Vrms(AC+DC) | 1 ~ 1000Vrms | 0.01Vrms | ±0.1% of nominal
voltage |
| Vpk | 1 ~ 1400Vpk | 0.01Vpk | ±0.5% of nominal
voltage |
| V(Crest Factor) | 1.0 ~ >2.8 | 0.01 | ±5% |
| Arms（AC） 10mV/A 1mV/A 65mV/1000A (AC) |
|||
| 0~150A | 0.01A | ±0.1%±0.1A | |
| 1~2000A | 0.01A | ±0.1%±0.1A | |
| 10~6000A | 0.01A | ±1%±2A | |
| A(Crest Factor) | 1 ~ 10 | 0.01 | ±5% |
| Frequency | 42.5~57.5（50Hz nominal） | 0.01Hz | ±0.01Hz |
| 51~69（60Hz nominal） | 0.01Hz | ±0.01Hz | |
| 320~480（400Hz nominal） | 0.01Hz | ±0.01Hz | |
| Dips & Swells | |||
| Vrms1/2 | 0 ~ 200% of nominal voltage | 0.01Vrms | ±0.2% |
| Arms1/2 | depends on current clamps | 0.01A | ±1% |
| Harmonic (IEC61000-4-7) | |||
| Harmonic Number | 1 ~ 100(50/60Hz) (IEC61000-4-7) 1~12(400Hz) | ||
| Harmonic Voltage %f | 0.0 ~ 100.0% | 0.01% | ±0.1% ± nx0.1% |
| Harmonic Current %f | 0.0 ~ 100.0% | 0.01% | ±0.1% ± nx0.1% |
| THD | 0.0 ~ 100.0% | 0.01% | ±2.5% |
| Phase | -180° ~180 0° | 0.1° | ± nx0.1° |
| Power and Energy | |||
| P, S, Q1 | Max. 6000MW | 0.1kW | ±1%±10 digits |
| PF & cosФ | 0 ~ 1 | 0.01 | ±0.1% |
| kWh, kVAh, kvarh | depends on nominal voltage and current clamps | ±1%±10 digits | |
| Flicker (IEC61000-4-15) | |||
| Pst(10min)/Plt (2 hrs) | 0.00 ~ 20.00 | 0.01 | ±5% |
| Unbalance | |||
| Voltage | 0.0 ~ 20.0% | 0.1% | ±0.1% |
| Current | 0.0 ~ 20.0% | 0.1% | ±1% |
| Voltage Phase | -360° ~ 0° | 0.1° | ±0.1° |
| Current Phase | -360° ~ 0° | 0.1° | ±0.5° |
| Voltage Transient | |||
| Vpk | ±6000Vpk | 1V | ±15% |
| Vrms | 10 ~ 1000Vrms | 1V | ±2.5% |
| Min. Test Time | 6.5us | ||
| Inrush Current | |||
| Arms | depends on current clamps | 0.01 | ±1% ± 5digits |
| Inrush Duration | 1 ~ 32min selectable | 10ms | ±20ms |
| Logger | |||
| Recording | user-defined parameters for 4 phases at the same time | ||
| Memory | Data stored in TF card, 32GB | ||
| Duration Time | 2 hrs to 1 year, depends on the recording items and time interval | ||
| Interval | 1s to 60 minutes | ||
CT clamps: (Option)
A: Range: 5A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 45Hz~55Hz Clamps Radius: 8mm
Size: 158*43*24mm
B: Range: 50A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 50Hz~400Hz Clamps Radius: 8mm
Size: 171*46*27mm
C: Range: 100A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 50Hz~400Hz Clamps Radius: 13mm
Size: 174*52*27mm
D: Range: 1A~1000A, Output Voltage Ratio: 1mV/A Accuracy: 1%
Working Frequency: 40Hz~100Hz Clamps Radius: 52mm
Size: 111*216*45mm
E: Flex type Primary Current Rating: 3000A , Output Voltage Ratio: 65mV/1000A
Range: 15A~3000A Accuracy: 1%+position Error
Maximum Allowable imput: 100KA Phase Error: Less than 1%
Noise: less than 2mVrms(10Hz~10Khz) Frequency Characteristic: 10Hz~10KHz(-3db)
Weight: 130g Length: 200cm CT perimeter: 50cm Postion Error: 2%
F: Flex type Primary Current Rating: 5000A , Output Voltage Ratio: 50mV/1000A
Range: 20A~1000A Accuracy: 1%+position Error
Maximum Allowable imput: 100KA Phase Error: Less than 1%
Noise: less than 2mVrms(10Hz~10Khz) Frequency Characteristic: 10Hz~10KHz(-3db)
Weight: 130g Length: 200cm CT perimeter: 50cm Postion Error: 2%
| General | |
| Batteries Inside | Lithium ion, 7.4V 5200mAh |
| Characteristic | Dips and swell, Harmonic（IEC61000-4-30), Power and Energy |
Power Quality Analyzer Class A Energy Analyzer Harmonic Tester
- Product Code: PQAN-7620
- Availability: 2-3 Days
-
$3,328.00
Related Products
V9 Finder HD Satellite Finder DVB S2 Digital H.265 Full 1080P
V9 Finder HD Satellite Finder DVB S2 Digital H.265 Full 1080P Signal Detector Features: Fully DV..
$84.99
Cheap Color Screen UT123 Mini Digital Multimeter AC DC Voltage Meter
Color Screen UT123 Mini Digital Multimeter AC DC Voltage Meter Features * The battery status det..
$24.99
UT161B UT161E UT161D Smart Digital Multimeter NCV True RMS
UT161B UT161E UT161D Smart Digital Multimeter True RMSUT161 series are reliable true RMS digital mul..
$62.55
AC DC 2000A Current Clamp Meter Multimeter Amperage 80mm CT
AC DC 2000A Current Clamp Meter Multimeter Amperage 80mm CT Leakage Current Tester Features: ..
$288.99
UT206A Auto Range 1000A Digital Clamp Meter Temperature Tester
UNI-T UT206A Auto Range 1000A LCD Backlight Digital Clamp Multitester w/ Frequency Duty Cycle Test M..
$78.55
PD Recharger Battery USB Tester Type-C PD Trigger USB Voltmeter
PD Recharger Battery USB Tester Type-C PD Trigger USB Voltmeter Features: Real-time detection ..
$14.99
40mF Capacitance Meter Intelligent Digital Multimeter UT71C
40mF Capacitance Meter Intelligent Digital Multimeter UT71C UT71 series can quickly sol..
$216.99
300mm Flexible AC Current Clamp Multimeter 0mA~10000A Clamp on Ammeter
300mm Flexible AC Current Clamp Meter 0mA~10000A Clamp on Ammeter Eletrical Tester CAT III Featur..
$138.00
Tags: Power Quality Analyzer, Energy Analyzer, Harmonic Power Analyzer
Featured
-200x200.jpg "DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide")
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide ISO17025 Not Including Th..
$28.99 $35.99
-200x200.jpg "Steel Wire Rope Hoisting Cable Diameter Digital Caliper Sponge Thickness Vernier Caliper")
Steel Wire Rope Hoisting Cable Diameter Digital Caliper Sponge Thickness Vernier Caliper
Steel Wire Rope Hoisting Cable Diameter Digital Caliper With Large Measuring Jaw Sponge Th..
$77.99
Universal Bridge Cam Welding Gage
Universal Bridge Cam Welding Gage WGU-8M WG-218 is updated from ROK WG-208, These two ..
$18.99
Dual Range NCV test 35/6 Bit Digital Multimeter
Dual Range NCV test 35/6 Bit Digital Multimeter Features: 1. AC DC measureme..
$48.90
Latest
Digital Impact Torque Meter
Digital Impact Torque Meter | Analyzers & Meters for Calibration ..
$933.00
Digital Torque Meter with Printer
Digital Torque Meter with Printer Specification: Part No. Max N.m Ma..
$698.00
Digital Torque Meter Without Printer 1 N.m
Digital Torque Meter Without Printer 1-N.m Features 1.High precision, high resolution, quick sam..
$555.00
Digital Torque Meter Small Range Three Jaws
Digital Torque Meter Small Range Three Jaws Features: Torque Value Reading: Accu..
$510.00
Digital Torque Screwdriver With Display
Digital Torque Screwdriver With Display Features: With backlight Instantly switches..
$88.00
7pcs Welding Gauge Set
7pcs Welding Gauge Set Including: WG-504 0-15mm Taper welding gauge CL-110 ..
$83.00
Digital Torque Wrench Tester 20N.mTorque Wrench Calibrator
Digital Torque Wrench Tester 20N.m Torque Wrench Calibrator &nbs..
$1,800.00
5.00-10.00 Metric Pin Gauge Set Steel 0.01 increments
5.00-10.00 Metric Pin Gauge Set Steel 0.01 increments Features: ----P..
$122.99