Power Quality Analyzer Class A Energy Analyzer Harmonic Tester
Ask sales reps for details.
Part No: PQAN7620
Features:
More accurate up to 0.1% on Vrms(voltage), Frequency: 0.01Hz
Meet standard: IEC61000-4-30 Class S
Phase: -180~180
Lart 5.6 inch TFT LCD 640*480 resolution
With USB and lan interface
Safety standard: IEC61010-1 ,Safety Degree: 600V CAT IV 1000V CAT III
Specification:
| Selection Table | |
| Model | PQAN7610 |
| Standard compliance | IEC61000-4-30 Class A |
| Volt Amp Hz | ● |
| Dips and swell | ● |
| Harmonics | ● 100th Max. |
| Power and energy | ● |
| Unbalance | ● |
| Monitor | ● |
| Inrush | ● |
| Flicker | ● |
| Transients | ● |
| 400Hz | ● |
| Wave Recording | ● |
| Sample rate | 163.84kS/s （50/60Hz） |
| TF Card | 32GB |
| Battery | Lithium ion, 7.4V 5200mAh |
| GPS/Beidou time synchronization | ● (option) |
| WIFI | ● |
| Input Characteristics | |
| Number of inputs | 4 (3 phase + neutral) DC coupling |
| Voltage Inputs | |
| Max. input voltage | 1000Vrms |
| Max. peak measurement voltage | 6kV |
| Input Impedance | 4MΩ |
| Current Input | |
| Type | Clamp or current transformer with mV output |
| Input Range | depends on supplied current clamp |
| Input Impedance | 50kΩ 100kΩ (SA2200) |
| Sampling System | |
| Resolution | 8 channels 16 bits AD |
| Sampling Rate | 163.84kS/s (50/60Hz), 8 channels sample
synchronously (SA2200) |
| Measurement | |||
| Measurement Range | Resolution | Accuracy | |
| Voltage/Current/Frequency | |||
| Vrms(AC+DC) | 1 ~ 1000Vrms | 0.01Vrms | ±0.1% of nominal
voltage |
| Vpk | 1 ~ 1400Vpk | 0.01Vpk | ±0.5% of nominal
voltage |
| V(Crest Factor) | 1.0 ~ >2.8 | 0.01 | ±5% |
| Arms（AC） 10mV/A 1mV/A 65mV/1000A (AC) |
|||
| 0~150A | 0.01A | ±0.1%±0.1A | |
| 1~2000A | 0.01A | ±0.1%±0.1A | |
| 10~6000A | 0.01A | ±1%±2A | |
| A(Crest Factor) | 1 ~ 10 | 0.01 | ±5% |
| Frequency | 42.5~57.5（50Hz nominal） | 0.01Hz | ±0.01Hz |
| 51~69（60Hz nominal） | 0.01Hz | ±0.01Hz | |
| 320~480（400Hz nominal） | 0.01Hz | ±0.01Hz | |
| Dips & Swells | |||
| Vrms1/2 | 0 ~ 200% of nominal voltage | 0.01Vrms | ±0.2% |
| Arms1/2 | depends on current clamps | 0.01A | ±1% |
| Harmonic (IEC61000-4-7) | |||
| Harmonic Number | 1 ~ 100(50/60Hz) (IEC61000-4-7) 1~12(400Hz) | ||
| Harmonic Voltage %f | 0.0 ~ 100.0% | 0.01% | ±0.1% ± nx0.1% |
| Harmonic Current %f | 0.0 ~ 100.0% | 0.01% | ±0.1% ± nx0.1% |
| THD | 0.0 ~ 100.0% | 0.01% | ±2.5% |
| Phase | -180° ~180 0° | 0.1° | ± nx0.1° |
| Power and Energy | |||
| P, S, Q1 | Max. 6000MW | 0.1kW | ±1%±10 digits |
| PF & cosФ | 0 ~ 1 | 0.01 | ±0.1% |
| kWh, kVAh, kvarh | depends on nominal voltage and current clamps | ±1%±10 digits | |
| Flicker (IEC61000-4-15) | |||
| Pst(10min)/Plt (2 hrs) | 0.00 ~ 20.00 | 0.01 | ±5% |
| Unbalance | |||
| Voltage | 0.0 ~ 20.0% | 0.1% | ±0.1% |
| Current | 0.0 ~ 20.0% | 0.1% | ±1% |
| Voltage Phase | -360° ~ 0° | 0.1° | ±0.1° |
| Current Phase | -360° ~ 0° | 0.1° | ±0.5° |
| Voltage Transient | |||
| Vpk | ±6000Vpk | 1V | ±15% |
| Vrms | 10 ~ 1000Vrms | 1V | ±2.5% |
| Min. Test Time | 6.5us | ||
| Inrush Current | |||
| Arms | depends on current clamps | 0.01 | ±1% ± 5digits |
| Inrush Duration | 1 ~ 32min selectable | 10ms | ±20ms |
| Logger | |||
| Recording | user-defined parameters for 4 phases at the same time | ||
| Memory | Data stored in TF card, 32GB | ||
| Duration Time | 2 hrs to 1 year, depends on the recording items and time interval | ||
| Interval | 1s to 60 minutes | ||
CT clamps: (Option)
A: Range: 5A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 45Hz~55Hz Clamps Radius: 8mm
Size: 158*43*24mm
B: Range: 50A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 50Hz~400Hz Clamps Radius: 8mm
Size: 171*46*27mm
C: Range: 100A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 50Hz~400Hz Clamps Radius: 13mm
Size: 174*52*27mm
D: Range: 1A~1000A, Output Voltage Ratio: 1mV/A Accuracy: 1%
Working Frequency: 40Hz~100Hz Clamps Radius: 52mm
Size: 111*216*45mm
E: Flex type Primary Current Rating: 3000A , Output Voltage Ratio: 65mV/1000A
Range: 15A~3000A Accuracy: 1%+position Error
Maximum Allowable imput: 100KA Phase Error: Less than 1%
Noise: less than 2mVrms(10Hz~10Khz) Frequency Characteristic: 10Hz~10KHz(-3db)
Weight: 130g Length: 200cm CT perimeter: 50cm Postion Error: 2%
F: Flex type Primary Current Rating: 5000A , Output Voltage Ratio: 50mV/1000A
Range: 20A~1000A Accuracy: 1%+position Error
Maximum Allowable imput: 100KA Phase Error: Less than 1%
Noise: less than 2mVrms(10Hz~10Khz) Frequency Characteristic: 10Hz~10KHz(-3db)
Weight: 130g Length: 200cm CT perimeter: 50cm Postion Error: 2%
| General | |
| Batteries Inside | Lithium ion, 7.4V 5200mAh |
| Characteristic | Dips and swell, Harmonic（IEC61000-4-30), Power and Energy |
Power Quality Analyzer Class A Energy Analyzer Harmonic Tester
- Product Code: PQAN-7620
- Availability: 2-3 Days
-
$3,328.00
Related Products
Voltage Frequency Current Switch Digital Wattmeter Electronic Power Meter
Voltage Frequency Current Kwh Power Switch Digital Wattmeter Electronic Power Meter ..
$10.99
Non-Contact Earth Resistance Online Detector With Display
Non-Contact Earth Resistance Online Detector With Display Features: Online monitoring th..
$218.00
Industrial Digital Insulation Resistance Tester 5kv
Industrial Digital Insulation Resistance Tester 5kv Selectable Voltage 250 500 1000 2500 5000 V High..
$188.99
Earth Ground Resistance Tester Low Resistance Measurement Tools Earth Voltage Meter
Earth Ground Resistance Tester Low Resistance Measurement Tools Earth Voltage Meter..
$218.88
300K Ohm Earth Resistance Tester with Double Clamp
300K Ohm Earth Resistance Tester with Double Clamp Features: 1.The two-, three- and four-w..
$680.00
UT58A UT58B UT58C UT58D UT58E Large Screen Digital Multimeter
UT58A UT58B UT58C UT58D UT58E Large Screen Digital Multimeter UT58A Choose A UT58B Choose B ..
$46.99
70mm Clamp Meter 1200A Leakage Current Tester Harmonics Analyzer
70mm Clamp Meter 1200A Leakage Current Tester Harmonics Analyzer It is..
$148.88
UT258A Leakage Digital Current Clamp Meter Data Storage
UT258A Leakage Digital Current Clamp Meter Data Storage Features: ..
$137.88
Tags: Power Quality Analyzer, Energy Analyzer, Harmonic Power Analyzer
Featured
-200x200.jpg "DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide")
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide ISO17025 Not Including Th..
$28.99 $35.99
-200x200.jpg "Steel Wire Rope Hoisting Cable Diameter Digital Caliper Sponge Thickness Vernier Caliper")
Steel Wire Rope Hoisting Cable Diameter Digital Caliper Sponge Thickness Vernier Caliper
Steel Wire Rope Hoisting Cable Diameter Digital Caliper With Large Measuring Jaw Sponge Th..
$77.99
Universal Bridge Cam Welding Gage
Universal Bridge Cam Welding Gage WGU-8M WG-218 is updated from ROK WG-208, These two ..
$18.99
Dual Range NCV test 35/6 Bit Digital Multimeter
Dual Range NCV test 35/6 Bit Digital Multimeter Features: 1. AC DC measureme..
$48.90
Latest
Digital Impact Torque Meter
Digital Impact Torque Meter | Analyzers & Meters for Calibration ..
$933.00
Digital Torque Meter with Printer
Digital Torque Meter with Printer Specification: Part No. Max N.m Ma..
$698.00
Digital Torque Meter Without Printer 1 N.m
Digital Torque Meter Without Printer 1-N.m Features 1.High precision, high resolution, quick sam..
$555.00
Digital Torque Meter Small Range Three Jaws
Digital Torque Meter Small Range Three Jaws Features: Torque Value Reading: Accu..
$510.00
Digital Torque Screwdriver With Display
Digital Torque Screwdriver With Display Features: With backlight Instantly switches..
$88.00
7pcs Welding Gauge Set
7pcs Welding Gauge Set Including: WG-504 0-15mm Taper welding gauge CL-110 ..
$83.00
Digital Torque Wrench Tester 20N.mTorque Wrench Calibrator
Digital Torque Wrench Tester 20N.m Torque Wrench Calibrator &nbs..
$1,800.00
5.00-10.00 Metric Pin Gauge Set Steel 0.01 increments
5.00-10.00 Metric Pin Gauge Set Steel 0.01 increments Features: ----P..
$122.99