Power Quality Analyzer Class A Energy Analyzer Harmonic Tester
Ask sales reps for details.
Part No: PQAN7620
Features:
More accurate up to 0.1% on Vrms(voltage), Frequency: 0.01Hz
Meet standard: IEC61000-4-30 Class S
Phase: -180~180
Lart 5.6 inch TFT LCD 640*480 resolution
With USB and lan interface
Safety standard: IEC61010-1 ,Safety Degree: 600V CAT IV 1000V CAT III
Specification:
Selection Table | |
Model | PQAN7610 |
Standard compliance | IEC61000-4-30 Class A |
Volt Amp Hz | ● |
Dips and swell | ● |
Harmonics | ● 100th Max. |
Power and energy | ● |
Unbalance | ● |
Monitor | ● |
Inrush | ● |
Flicker | ● |
Transients | ● |
400Hz | ● |
Wave Recording | ● |
Sample rate | 163.84kS/s (50/60Hz) |
TF Card | 32GB |
Battery | Lithium ion, 7.4V 5200mAh |
GPS/Beidou time synchronization | ● (option) |
WIFI | ● |
Input Characteristics | |
Number of inputs | 4 (3 phase + neutral) DC coupling |
Voltage Inputs | |
Max. input voltage | 1000Vrms |
Max. peak measurement voltage | 6kV |
Input Impedance | 4MΩ |
Current Input | |
Type | Clamp or current transformer with mV output |
Input Range | depends on supplied current clamp |
Input Impedance | 50kΩ 100kΩ (SA2200) |
Sampling System | |
Resolution | 8 channels 16 bits AD |
Sampling Rate | 163.84kS/s (50/60Hz), 8 channels sample
synchronously (SA2200) |
Measurement | |||
Measurement Range | Resolution | Accuracy | |
Voltage/Current/Frequency | |||
Vrms(AC+DC) | 1 ~ 1000Vrms | 0.01Vrms | ±0.1% of nominal
voltage |
Vpk | 1 ~ 1400Vpk | 0.01Vpk | ±0.5% of nominal
voltage |
V(Crest Factor) | 1.0 ~ >2.8 | 0.01 | ±5% |
Arms(AC) 10mV/A 1mV/A 65mV/1000A (AC) |
|||
0~150A | 0.01A | ±0.1%±0.1A | |
1~2000A | 0.01A | ±0.1%±0.1A | |
10~6000A | 0.01A | ±1%±2A | |
A(Crest Factor) | 1 ~ 10 | 0.01 | ±5% |
Frequency | 42.5~57.5(50Hz nominal) | 0.01Hz | ±0.01Hz |
51~69(60Hz nominal) | 0.01Hz | ±0.01Hz | |
320~480(400Hz nominal) | 0.01Hz | ±0.01Hz | |
Dips & Swells | |||
Vrms1/2 | 0 ~ 200% of nominal voltage | 0.01Vrms | ±0.2% |
Arms1/2 | depends on current clamps | 0.01A | ±1% |
Harmonic (IEC61000-4-7) | |||
Harmonic Number | 1 ~ 100(50/60Hz) (IEC61000-4-7) 1~12(400Hz) | ||
Harmonic Voltage %f | 0.0 ~ 100.0% | 0.01% | ±0.1% ± nx0.1% |
Harmonic Current %f | 0.0 ~ 100.0% | 0.01% | ±0.1% ± nx0.1% |
THD | 0.0 ~ 100.0% | 0.01% | ±2.5% |
Phase | -180° ~180 0° | 0.1° | ± nx0.1° |
Power and Energy | |||
P, S, Q1 | Max. 6000MW | 0.1kW | ±1%±10 digits |
PF & cosФ | 0 ~ 1 | 0.01 | ±0.1% |
kWh, kVAh, kvarh | depends on nominal voltage and current clamps | ±1%±10 digits | |
Flicker (IEC61000-4-15) | |||
Pst(10min)/Plt (2 hrs) | 0.00 ~ 20.00 | 0.01 | ±5% |
Unbalance | |||
Voltage | 0.0 ~ 20.0% | 0.1% | ±0.1% |
Current | 0.0 ~ 20.0% | 0.1% | ±1% |
Voltage Phase | -360° ~ 0° | 0.1° | ±0.1° |
Current Phase | -360° ~ 0° | 0.1° | ±0.5° |
Voltage Transient | |||
Vpk | ±6000Vpk | 1V | ±15% |
Vrms | 10 ~ 1000Vrms | 1V | ±2.5% |
Min. Test Time | 6.5us | ||
Inrush Current | |||
Arms | depends on current clamps | 0.01 | ±1% ± 5digits |
Inrush Duration | 1 ~ 32min selectable | 10ms | ±20ms |
Logger | |||
Recording | user-defined parameters for 4 phases at the same time | ||
Memory | Data stored in TF card, 32GB | ||
Duration Time | 2 hrs to 1 year, depends on the recording items and time interval | ||
Interval | 1s to 60 minutes |
CT clamps: (Option)
A: Range: 5A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 45Hz~55Hz Clamps Radius: 8mm
Size: 158*43*24mm
B: Range: 50A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 50Hz~400Hz Clamps Radius: 8mm
Size: 171*46*27mm
C: Range: 100A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 50Hz~400Hz Clamps Radius: 13mm
Size: 174*52*27mm
D: Range: 1A~1000A, Output Voltage Ratio: 1mV/A Accuracy: 1%
Working Frequency: 40Hz~100Hz Clamps Radius: 52mm
Size: 111*216*45mm
E: Flex type Primary Current Rating: 3000A , Output Voltage Ratio: 65mV/1000A
Range: 15A~3000A Accuracy: 1%+position Error
Maximum Allowable imput: 100KA Phase Error: Less than 1%
Noise: less than 2mVrms(10Hz~10Khz) Frequency Characteristic: 10Hz~10KHz(-3db)
Weight: 130g Length: 200cm CT perimeter: 50cm Postion Error: 2%
F: Flex type Primary Current Rating: 5000A , Output Voltage Ratio: 50mV/1000A
Range: 20A~1000A Accuracy: 1%+position Error
Maximum Allowable imput: 100KA Phase Error: Less than 1%
Noise: less than 2mVrms(10Hz~10Khz) Frequency Characteristic: 10Hz~10KHz(-3db)
Weight: 130g Length: 200cm CT perimeter: 50cm Postion Error: 2%
General | |
Batteries Inside | Lithium ion, 7.4V 5200mAh |
Characteristic | Dips and swell, Harmonic(IEC61000-4-30), Power and Energy |
Power Quality Analyzer Class A Energy Analyzer Harmonic Tester
- Product Code: PQAN-7620
- Availability: 2-3 Days
-
$3,328.00
Related Products
UT586 Digital RCD Tester ELCB Testers Leakage Protection Switch Tester Fuse Security Tester
UT586 Digital RCD Tester ELCB Testers Leakage Protection Switch Tester Fuse Security Tester  ..
$363.00
UT511 Digital Insulation Resistance Tester Megohmmeter Megger AC DC Volttage Continuity Tester
UT511 Digital Insulation Resistance Tester Megohmmeter Megger AC DC Volttage Continuity Te..
$195.99
Earth Resistance Tester With Double Clamp
Earth Resistance Tester With Double Clamp Earth Resistance Measurement, DC Resistance Measu..
$699.00
ESR02PRO Digital Transistor Tester Capacitance Inductance Resistance
ESR02PRO Digital Transistor Tester Capacitance Inductance ResistanceDescriptions:This meter is a sma..
$29.44
Battery Coulommeter Counter 100V 100A Battery Tester
Battery Coulommeter Counter 100V 100A Battery Tester Desciption: Type: Battery tester Mod..
$41.99
UT139A UT139B UT139C true RMS Digital Multimeter LED backlight
UT139A True RMS Digital MultimeterUT139A Choose AUT139B Choose BUT139C Choose CBat..
$39.99
Digital Clamp Meter Multimeter AC/DC Voltmeter Current Resistance Tester
Digital Clamp Meter Multimeter AC/DC Voltmeter Current Resistance TesterProduct informationRange0mA~..
$147.56
PD Recharger Battery USB Tester Type-C PD Trigger USB Voltmeter
PD Recharger Battery USB Tester Type-C PD Trigger USB Voltmeter Features: Real-time detection ..
$14.99
Tags: Power Quality Analyzer, Energy Analyzer, Harmonic Power Analyzer
Featured
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide ISO17025 Not Including Th..
$28.99 $35.99
Steel Wire Rope Hoisting Cable Diameter Digital Caliper Sponge Thickness Vernier Caliper
Steel Wire Rope Hoisting Cable Diameter Digital Caliper With Large Measuring Jaw Sponge Th..
$77.99
Universal Bridge Cam Welding Gage
Universal Bridge Cam Welding Gage WGU-8M WG-218 is updated from ROK WG-208, These two ..
$18.99
Dual Range NCV test 35/6 Bit Digital Multimeter
Dual Range NCV test 35/6 Bit Digital Multimeter Features: 1. AC DC measureme..
$48.90
Latest
Electric Ratchet Cable Cutter Tools Battery Powered Cordless Cutters
Electric Ratchet Cable Cutter Tools Battery Powered Cordless Cutters DO not cut steel wire!!! ..
$289.00
1.0-13.0mm Twist Drill Bit Set Cobalt M35 For Drill Stainless Steel
1.0-13.0mm Twist Drill Bit Set Cobalt M35 For Drill Stainless Steel There is a little difference ..
$42.99
1.0-10mm Cobalt Twist Drill Bit Set M35
1.0-10mm Cobalt Twist Drill Bit Set M3 Box shape or color may differs from batches. ..
$19.99
13pcs Drill Bit Set Straight Shank M35
13pcs Drill Bit Set Straight Shank M35 Specification: 1.5mm, 2mm, 2.5mm, 3mm, ..
$9.90
Metric 99 Pieces Twist Drill Bit Set Straight Shank
Metric 99 Pieces Twist Drill Bit Set Straight Shank Material: 4241 Do not use for carbon steel..
$7.99
360 Green Beam Laser Level Self Levelling
360 Green Beam Laser Level Self Levelling Features: High quality LD Light source Re..
$106.99
50Pcs Twist Drill Bit Set HSS Coated 1-3mm Steel
50Pcs Twist Drill Bit Set HSS Coated 1-3mm Steel Specification: Material: Hi..
$8.99
50pcs Twist Drill Bit Set 1-3mm
50pcs Twist Drill Bit Set 1-3mm Color: silver -Size: 1 mm/0.04 inch. 15 mm/0.06 inch. ..
$5.99