DMA DRO KIT RPM 3 Axis LCD DRO Digital Readout with IP67 Magnetic Scale

Order included :

3pcs (0-1100mm )DRO Magnetic Scake Kit

1* 3 Axis LCD digital Readout with RPM function

3* Magnetic scale (0-1100mm ,5um Resolution )

1* Suitable Plug

All of installation accessory are included  (eg ,mounting plate ,bracket ,little wiring.screw .. )

Travel length (LO): 50mm ,100mm ,150mm ,200mm ,250mm ,300mm , 350mm , 400mm ,450mm ,

500mm ,550mm ,600mm ,650mm ,700mm ,750mm ,800mm ,850mm ,900mm ,950mm ,1000mm ,1050,1100mm.

Pls leave message the travel length you need after place the order

Travel length (LO): 50mm ,100mm ,150mm ,200mm ,250mm ,300mm , 350mm , 400mm ,450mm ,

500mm ,550mm ,600mm ,650mm ,700mm ,750mm ,800mm ,850mm ,900mm ,950mm ,1000mm

,1050,1100mm.1150mm , 1200mm ,1250mm ,1300mm, 1350mm,1400mm ,1450mm ,1500mm ,

Pls leave message the travel length you need after place the order

Note : The Magnetic Scale can cut by yourself if the Scale is too long .

Dear Customer:

Before place an order, pls leave message tell us the detail travel length.

Technical Parameters:

●Voltage Range:AC80V-260V/50HZ-60HZ

●Power Dissipation:15W

●Working Temperature:-10℃~60℃

●Coordinate Display:2,3,4,5Axis

●Operating Keypad:Mechanical Keypad

●Input Signal:5V TTL/RS422

●Input Frequency:≤4MHZ

●Resolution:0.1μm，0.2μm，0.5μm，1μm，2μm，2.5

μm， 5μm，10μm，50μm

Features:

-7’ true color LCD screen,easy to recognizing.

-Saving the drawing function,the DRO allows to save the drawings into the system which makes the machining to be much more convenient.

- Special previewing the drawing function,after setting well the parameters,the DRO will display the machined well effect which makes the operating be more visual.

- Displaying the tool’s current position function,during the machining,the system will display the tool’s current position according to the drawing

which makes the machining be much more easier.

- Help function,during the machining,if there is any doubt,pressing the help button will help you to solve.

-Custom settings for the shortcut keys,operator can set the shortcut keys according to his operating habit.

1. Zeroing,Data Recovery,
2. Value Inputting,
3. Metric and Imperial Switching
4.  Power off memory,Encoder
5. Selection(Rotary or Linear),
6. Linear Compensation,Non-linear Compensation,
7. Calculator
8. Counting Direction
9. Setting,ABS/INC Coordinate
10. 200 sets of SDM Coordinates,

11. REF Centering,
12. PLD Function,
13. PCD Function ,
14. Simple R function,、
15. Smooth R Function,
16. Radius/Diameter switching,
17. Axis summing,
18. Digital Filtering Function,
19. Taper Measuring Function，
20. Bevel Function ,
21. Rectangle Chambering Function,
22. Rotational Speed Measurement ,
23. Linear Measuring Basing Rotary Encoder,
24. 16 sets of Tool Memory,
25. Dynamic Graphic
25. Preview Drawing

Technical Parameters:

● Voltage:4.7V to 7.5V(The range of anti-pole and over-

voltage protection:-20V-+20V)

●Supply current:＜35mA

●Cable Voltage-drop:~4.8mV/m-without load

~12.5mV/m-with 120Ω load

●Output signal:RS422,TTL

●Signal Level:UH≥2.5V at-IH=20mA

UL≤0.5V at IL=20mA

●Temperature: working:-10℃-+80℃

Storage：-40℃-+85℃

●Resolution:0.01mm,0.005mm,0.001mm

●Repeat Accuracy:1 pulse

●Maximum cable length:200M

Features:

●Rated to IP67 protection class.

● Automatic gain control technics,reduced the requirement for installation.The gap between the reader and tape can be 3mm.

● Protection of the anti-pole of the power and wrong wire connection(voltage＜5.5V).

●High Speed,can reach 150 Meters/Minute for the resolution of 5 micron.

●Clear indication LED light(Red&Green),easy for installation and adjustment.