9999A Flexible Clamp Meter 200mm Coil Diameter Flexible Current Amp Probe IEC61326

Features:

1.Flexible coil without any exposed metal conductors, small size, light weight, soft and flexible, suitable for large size conductor, narrow environment and cable dense place.
2.No magnetic saturation, strong anti-interference ability. Especially suitable for the relay protection, silicon controlled rectifier, frequency conversion speed regulation, semiconductor switch, power electronic conversion equipment, arc welding and other industrial environment with serious signal distortion.
3.Memory: data storage 99 groups.
4.Peak value hold function.

Specification:

Power Supply	Zn-Mn dry battery 6F22 9V
LCD Size	35mm×21.5mm; display area: 32mm×15mm
Measurement Range	AC 0.00A~9999A
Solution	AC 10mA
Accuracy	±2%rdg±3dgt(the wire is at the center of the flexible coil,23℃±2℃)
Coil Diameter	φ200mm
Coil Thickness	φ7.5mm
The Measured Current Frequency	50Hz/60Hz(Automatic)
Backlight	with backlight, convenient to use in dark site
Meter Size	190mm×370mm×40mm
Weight	Meter: about 200g(include battery);total weight: about 0.38kg(include accessory)
Electric Field Interference	No hysteresis effect, strong anti-interference ability
Position Error	The measured wire should be in the center of the flexible coil as far as possible, not close to the opening and closing mouth, the test error at the opening and closing mouth will increase by one times or more
Sampling Rate	2 times /second
Memory	99 groups,flicker to flash display "FULL" symbol indicate storage full
Peak Hold	Peak value capture and hold function, long press POWER key display peak value, and the peak value symbol display
Data Hold	Data hold function: "DH" symbol display
Line Voltage	Line measurement below AC600V
Overflow Display	Exceed measure range overflow function: “OL”symbol display
Battery Level	While battery voltage is lower than 7.2V. low battery voltage symbol display, remind to replace the battery
Rated Current	About 8mA
Insulation Resistance	100MΩ or larger, 1000V
Suitable Safety Standard	IEC1010-1, IEC1010-2-032, Pollution level 2, CAT VI(1000V) IEC61326(EMC standard)
Working Temperature & Humidity	-10℃~40℃; below 80%RH
Storage Temperature & Humidity	-10℃~60℃; below 70%RH

General
Calibration Standard	IEC1010-1, IEC1010-2-032, Pollution level 2, CAT VI(1000V) IEC61326(EMC standard)
Accuracy	±2%rdg±3dgt(the wire is at the center of the flexible coil,23℃±2℃)